Bookmark and Share

Friday, 10 February 2012

Green Cloud

Green computing is defined as the atudy and practice of designing , manufacturing, using, and disposing of computers, servers, and associated subsystems—such as monitors, printers, storage devices, and networking and communications systems—efficiently and effectively with minimal or no impact on the environment." The goals of green computing are similar to green chemistry; reduce the use of hazardous materials, maximize energy efficiency during the product's lifetime, and promote the recyclability or biodegradability of defunct products and factory waste. Research continues into key areas such as making the use of computers as energy-efficient as possible, and designing algorithms and systems for efficiency-related computer technologies.

There are several approaches to green computing,namely

• Product longetivity

• Algorithmic efficeincy

• Resource allocation

• Virtualisation

• Power management etc.

Need of Green Computing in Clouds

Modern data centers, operating under the Cloud computing model are hosting a variety of applications ranging from those that run for a few seconds (e.g. serving requests of web applications such as e-commerce and social networks portals with transient workloads) to those that run for longer periods of time (e.g. simulations or large data set processing) on shared hardware platforms. The need to manage multiple applications in a data center creates the challenge of on-demand resource provisioning and allocation in response to time-varying workloads. Normally, data center resources are statically allocated to applications, based on peak load characteristics, in order to maintain isolation and provide performance guarantees.

Until recently, high performance has been the sole concern in data center deployments and this demand has been fulfilled without paying much attention to energy consumption. The average data center consumes as much energy as 25,000 households [20]. As energy costs are increasing while availability dwindles, there is a need to shift focus from optimising data center resource management for pure performance to optimising for energy efficiency while maintaining high service level performance. According to certain reports, the total estimated energy bill for data centers in 2010 is $11.5 billion and energy costs in a typical data center double every five years.

Applying green technologies is highly essential for the sustainable development of cloud computing. Of the various green methodologies enquired, the DVFS technology is a highly hardware oriented approach and hennce less flexible. The reuslt of various VM migration simulations show that MM policy leads to the best energy savings: by 83%, 66% and 23% less energy consumption relatively to NPA, DVFS and ST policies respectively with thresholds 30-70% and ensuring percentage of SLA violations of 1.1%; and by 87%, 74% and 43% with thresholds 50-90% and 6.7% of SLA violations. MM policy leads to more than 10 times less VM migrations than ST policy. The results show flexibility of the algorithm, as the thresholds can be adjusted according to SLA requirements. Strict SLA (1.11%) allow the achievement of the energy consumption of 1.48 KWh. However, if SLA are relaxed (6.69%), the energy consumption is further reduced to 1.14 KWh. Single threshold policies can save power upto 20%,but they also cause a large number of SLA violations. Green scheduling algorithms based on neural predictors can lead to a 70% power savings. These policies also enable us to cut down data centre energy costs, thus leading to a strong,competitive cloud computing industry. End users will also benefit from the decreased energy bills.


Post a Comment

There was an error in this gadget